Tunze 3155 Osmolator


Add to Cart:
An optic operated mini sensor recognizes the water level precisely.
Displays all functions optically and sounds a signal in case of failures.
New Magnetic Sensor mount, so easy to use!
Redundant security: the main sensor is a proprietary optic sensor. Should that fail a safety float switch shuts the unit off and sounds an alarm. Even if that fails safety circuitry shuts off the pump after 10 minutes.
The Osmolator® will be supplied with low voltage metering pump, mounting magnets, tubing controller and power supply. You only need a reservoir and water!

Metering pump capacity: 2.95ft: 13.74gph, 4.92ft: 12.42gph, 6.56ft: 7.13h, Hmax: 7.22ft
Ready for mounting with power supply unit, metering pump, hose, sensor holding device.
Metering pump capacity: 0.9 m: 52 l/h, 1.5 m: 47 l/h, 2 m: 27 l/h, Hmax: 2.2 m
The precise water level is ensured by a non-wearing optical sensor and a transistor switch without any moving parts. This sensor is insensitive to soiling, light or magnetic fields.
Its “automatic eye” recognizes the water level precisely; even small waves or level variations cannot irritate the unit.
An independent safety sensor with a separate power supply circuit and relay control ensures reliable overflow protection.
An electronic time controller and current limiter for the pump connected result in a higher operational safety. This unit protects the metering pump against running dry and reports an empty storage container.
All functions are clearly displayed by LEDs; safety messages are also indicated by acoustic signals.
The osmotic regulators are all operated at safety extra-low voltage.

This product was added to our catalog on Wednesday 30 November, 2016.

Manufacturer Info

Who's Online

There currently are 9 guests online.
Your IP Address is:
Copyright © 2022 SoCal Tropical Fish Outlet. Powered by Zen Cart