Additives / Filter Media->
Brackets / Probe Holders
Chillers / Fans
|_ Neptune Apex AquaControllers
Dosing Pumps / Top Off->
Fish / Corals Food->
Fish / Corals Medications
Fish/Pest Traps and Acclimation
Fragging Tools / Supplies->
OverFlow Boxes / Sock Holders->
RO / DI Supplies
Skimmer stand/Coral Viewer
Substrate & Refugium Mud
UV Lights / Ozonizer Reactors
New Products ...
All Products ...
New Products [more]
Aqua Japan PRO44W Low Iron, WHITE Cabinet
Aqua Japan PRO65W Low Iron Glass, WHITE Color
Aqua Japan PRO28W Low Iron Glass, WHITE Cabinet
All Sea Marine
Aqua Craft Prod..
Aqua Ultra Viol..
D-D The Aquariu..
New Life Intern..
Red Sea Fish
Sea Side Aquati..
Two Little Fish..
Your Choice Aqu..
Write a review on this product.
Neptune Apex AquaControllers
:: Neptune Apex Energy Bar 8 EB8
Neptune Apex AquaControllers
Neptune Apex Energy Bar 8 EB8
Add to Cart:
Neptune Systems EnergyBar 8
The EnergyBar 8 module from Neptune Systems features 8 independently controllable outlets. With power failure detection, active electrical current monitoring, and failsafe features make this power bar far better than any competing units.
8 independently controllable 120V Outlets (Max 5 Amps, total current must be less than 15 Amps)
Plug and Play
Built-in 6 Port hub so that accessories can be easily added
Less than $20.00 per controllable outlet (Best in Industry)
Active electrical current monitoring and logging
Fail-safe features. On communication failures outlets revert to user settable default settings
High reliability direct wired connection to the Apex System(does not use X10)
Completely Silent Operation on 6 of the solid state switched outlets
Two of the outlets use mechanical relays for switching
"Soft-Start" for reduced pump wear
Up to 240 EB8s can be daisy chained together for up to 1920 switched outlets
All 8 outlets independently controllable
Built-in circuit breaker Protected
4 Mounting Holes for easy installation
Compact custom aluminum enclosure (10.0" x 3.75" x 1.8")
So Much More Than Just a Power Strip!
The Energy Bars available for Apex systems are much more than a glorified power strip. In fact, this component of your aquarium controller equipment is far more important than most people realize – and not all systems are created equal! It is obvious that this component is key to controlling things on your aquarium, but what is not so apparent is how it is critical to preventing catastrophe in your aquarium. Here’s how:
Let’s Start with Construction
Neptune Systems put a lot of thought into the construction of their Energy Bars. Unlike their competitors and simple power strips, Neptune Systems Energy Bars are made out of 16 gauge, powder-coated aluminum. They are built to be bullet proof – almost literally! Other controller companies use slick, inexpensive plastic enclosures, but they do not provide you with the best protection against catastrophic failure. You see, plastic timer powerstrips and power bars can easily catch fire should saltwater enter them and cause a short. With Neptune Systems solid metal Energy Bars, if such a short did occur, it would be far less likely to spread to the tank or your home.
Each of the independently controlled outlets on the Energy Bar is independently switched and easily carry the current load specified on the label. In fact, Neptune Systems intentionally underrate their outlets just to provide that extra level of security. So, depending on which Energy Bar you purchase, each outlet is rated from 5A to 10A at 120V AC or 8A on our 240V European model.
Current Sensing Device
The Energy Bars continually send their information on their present current drain to the Apex controller. This is incredibly useful information for a number of reasons. First, it enables you to recognize what the overall power consumption is on any Energy Bar so that you can better distribute the load across your multiple Energy Bars. Also by having this feature you can accurately determine the power utilization of your tank to compare different lights, pumps, protein skimmers, etc. (Not available on Energy Bar 6)
Soft-Start Extends the Life of Pumps
Imagine revving the engine in your car and dropping the shifter from P to D. That is exactly what happens when many controllers turn on the power to your pumps. Just like in a car, this kind of instantaneous application of power to your return pump after a feed cycle or to your powerheads will certainly lead to early failure. With the Energy Bar, power is slowly ramped on so that every motor is safely brought up to speed without the damaging torque.
Power Failure Detection, Communication Error Protection and Pre-programmed Failsafe State
Each Energy Bar outlet can be configured to be either in an off or on state if the power were to fail and then come back on or if there was a communication failure with the Apex base unit. This means that if, for instance, your heater was on when the power went off, you could have it programmed to be off until control was reestablished with the Apex base unit. Or, as another example, you could program your main return pump to always be in the on position in case of failure.
This feature is very important as many other controllers on the market may leave the outlet in its last position or possibly default all of the outlets to off or on. This is even true if they simply lose communication with their base unit due to a system failure, software bug, communication issue, lightning strike, etc. Not good! Imagine if you were away from home and a storm took out your Apex – the Energy Bar would just fall back to the Failsafe state you had programmed for such an incident. No worries.
One additional advanced feature is that when you use an additional Energy Bar on a UPS (uninterruptible power supply) you can have key lifesaving devices (low-power powerheads and bubblers) on there that will automatically go into their Failsafe State once power failure is detected. This can keep your tank alive and healthy for hours on a good UPS until the power comes back online. This will run completely unattended and is ideal to give you peace of mind when you are away from home whether out for the evening or on a two-week cruise!
It is easy to see the importance of this one small feature that differentiates the Neptune Systems Energy Bars from the rest and how once again Neptune Systems is looking out for every possible way for you to avoid catastrophe in your aquarium.
Extra AquaBus Connections
Each Energy Bar has additional connectors so that you can easily expand to other modules. This is very helpful for those that want to use one Apex to control multiple aquariums. The Energy Bar becomes an AquaBus “hub” at any location you choose – allowing you to connect more modules in that area. This is called a “star topology” and is unique to the Apex. Many other controllers require you to daisy chain together every module or they require you to buy a separate “hub” to connect everything together.APEX Ready
When you connect Apex Ready certified products to your Apex System, many new options will unfold. How about having your LED lights dim or change color temperature at the touch of your iPad? How about programming your Tunze or VorTech pumps for some serious wave action? That’s what you get when you pair up the Apex System and an Apex Ready certified product.
This product was added to our catalog on Tuesday 29 November, 2016.
Notify me of updates to
Neptune Apex Energy Bar 8 EB8
There currently are 49 guests online.
Your IP Address is: 188.8.131.52
Copyright © 2022
SoCal Tropical Fish Outlet
. Powered by